Skip to content
Free shipping for orders over 200 US dollor, orders will be shipping in 48 hours, 30 days rights of withdrawal.
Free shipping for orders over 200 US dollor, orders will be shipping in 48 hours, 30 days rights of withdrawal.

Difference between the Smart Lighting and Traditional Lighting

The difference between smart lighting and traditional lighting

1. Defects of traditional lighting
With the continuous progress and development of science and technology, a large number of emerging technologies have been applied to our lives, making our lives more convenient. Traditional lighting systems are widely used, but many of them also have some disadvantages.
Traditional lighting can generally only be turned on and off, and there are lighting devices that can adjust the brightness, but these require manual operations. Generally, the hotel has a large area and many functional areas. If there is no remote control function, it is inconvenient to realize full-on and full-off operations. And the more lamps installed, the more switches on the wall, affecting the overall aesthetics of the environment. The lights in multiple functional areas are turned on at the same time, and the lights in each functional area need to be manually turned off when they are turned off, which consumes a lot of manpower and electronic resources.
In traditional lighting, the switch of building wiring is manual, which restricts people's actions, is not convenient to use, and the wiring is very cumbersome, and the manual switch has a large potential safety hazard, which affects people's high-quality life.
In traditional lighting, infrared remote control is used, which cannot be dimmed manually, has no power saving function, no memory storage function, and no eye protection function.
Although traditional lighting has many styles, the technology lacks innovation, the building wiring is serious, and wires are consumed when switching lights, which is also a waste of manpower, material resources, and working hours. The continuous development of society is not only science and technology. The continuous innovation of technology, but people's consciousness is also changing at the same time of technological innovation, becoming more advanced and modern.
Traditional lighting is bright and fixed, consumes a lot of power and wastes energy.

2. The advantages of intelligent lighting
Compared with traditional lighting, smart lighting is optimized with the latest science and technology, and has the following advantages:
Fully automatic dimming: The intelligent lighting control system adopts a fully automatic working system. There are several basic states in the system, all states will automatically switch to each other according to the preset time, and the light will be adjusted to the most comfortable state as needed.
Make full use of natural light sources: The intelligent lighting system can adjust the natural light by adjusting the building equipment with light control function, and can be connected with the lighting system. If the weather changes, the system can automatically adjust to keep the light effect in a preset state.
Consistency of illuminance: In the lighting design of the building, the attenuation of the efficiency of the lamps and the reflectivity of the wall of the room over time will be considered, so the initial illuminance is set relatively high, but this will not only cause the building In the same period of use, the illuminance is not the same, and it will cause a certain amount of energy waste. Using intelligent lighting control, the illuminance can be adjusted intelligently, so that the lamps are not affected as much as possible.
Intelligent conversion of light environment scenes: The intelligent lighting system can preset different scene modules, and any need only needs to be operated on the corresponding control panel. In addition, the user can also adjust the scene timely through the control panel.
Energy saving: The intelligent lighting control system can intelligently adjust the dimming of most lamps to provide sufficient lighting where and when needed. The realization of intelligent lighting control can generally save 20% to 40% of electric energy, which not only reduces the user's electricity bills, but also reduces the power supply pressure.
Extend the life of the light source: The main reason for the damage of the light source is the overvoltage of the power grid. As long as the working voltage is appropriately reduced, the life of the light source can be extended. The intelligent lighting control system adopts the method of soft start, which can control the impulse voltage and surge voltage of the power grid, so that the filament is protected from thermal shock, thereby prolonging the life of the light source by 2 to 4 times. significance.

The difference between intelligent lighting wiring and traditional lighting wiring:
The installation of intelligent systems generally requires integrated wiring. The integrated wiring will have a once-and-for-all effect on future expansion of hotel intelligence, installation of intelligent electrical appliances, and hotel networking. Comprehensive wiring in the early stage is the best way. Intelligent system manufacturers Generally, a wiring scheme or a wiring diagram is provided.

The difference between intelligent lighting wiring and traditional lighting wiring is actually the difference between integrated wiring and traditional wiring. Hotel integrated wiring system refers to an electronic system that centrally controls lighting, electrical appliances, computer networks, multimedia audio-visual centers, automatic alarm devices, etc. The devices connected by these cables in the hotel can all be controlled centrally by one device, and they were all "siloed" in the past. Since they are different from systems that provide electrical energy (such as power lines), they transmit a low voltage (usually around 12V), so a system composed of such cables is called a weak current wiring system.

A general integrated wiring system is mainly composed of information access boxes, signal lines and signal ports. If the integrated wiring system is compared to the nervous system of a hotel, the information access box is the brain, and the signal lines and signal ports are nerves and nerve endings. The function of the information distribution box is to control the input and output electronic signals. Signal lines transmit electrical signals. The signal port is connected to the terminal equipment. Such as: TV, telephone, computer, etc.

Generally, the more basic information access box can control at least three electronic signals of cable television signals (including satellite TV of course), telephone voice signals and network digital signals; while more advanced wiring boxes can control video, audio (or AV) ) signal, if the community where the hotel is located provides corresponding services, it can also realize a series of functions such as electronic monitoring, automatic alarm, and remote reading of water, electricity and gas meters.

The difference between smart switches and traditional switches
The traditional building wiring switches are almost all manual, which has always bound people, the wiring is cumbersome, and it is inconvenient to use, and there are also great potential safety hazards. The remote control is also mostly infrared remote control, manual physical dimming, no power saving function, no memory storage function, can not play the role of eye protection.
Although there are many styles of lighting fixtures, they lack innovation in technology. The building wiring is modeled, waste switches and wires, and wastes manpower, material resources and man-hours. Traditional lighting is fixed and consumes a lot of power, which is far from adapting to social development. needs, and also does not conform to the concept of national sustainable development.
As an important part of the smart lighting system, the smart switch does not only turn on and off the light, but also solves a lot of troubles while it brings you fun.

Before entering the hotel, I want to turn on the lights in advance
Most of us have experienced things like this. We are very tired after running around for a day. After entering the room, we need to turn on the lights in functional areas such as the room and bathroom. Complicated, it makes people very anxious. This situation is not a problem for hotels that install smart switches. Even if you are far away from the hotel, you can ask the hotel staff to use the mobile APP to turn on the lights in your room.

The convenience brought by wireless mutual control switch
I believe that friends who have been in contact with decoration know that the mutual control switch is a traditional mutual control switch that needs to be wired in advance. Once the position of the mutual control is determined, it cannot be changed at will.

However, hotels that have installed smart switches know that the smart mutual control switch does not need a lot of control wires. It only needs to use a random stick switch and the main switch of the light for wireless pairing, so that you can stick it to any place in the hotel. , At the same time, it can also control the group, and turn the lights in the hotel on and off with one button, which is very convenient. The appearance of the random sticker is the same as that of the switch, the only difference is that there is no part of the rear 86 bottom case.

Previous article What are the Changes in Intelligent Lighting Industry?
Next article Bluetooth-mesh Technology in Smart Home